After MinideltaV2 is started, if the wireless network connection is successful, it will automatically connect to the update server to detect the new firmware version. If a new motor module firmware or LCD module firmware is detected, the bottom of the main interface will prompt that there is a new version of the firmware. Click the prompt message to trigger the automatic firmware update.
Notice: MinideltaV2 supports this function after the LCD module firmware is V1.5.0.\\
When a new motor module firmware is detected, the system will automatically download the firmware file, and perform verification and update. The update time is about 2 minutes, please be patient.
The printer will automatically restart after updating the motor module firmware.
When a new LCD module firmware is detected, the system will automatically download the firmware file and perform verification. The time is about 5 minutes. Please wait patiently.
If there are new motor module firmware and LCD module firmware at the same time, the system will not trigger the update of the LCD module firmware until the motor module firmware has been updated.
After the verification is completed, the printer will restart to the update program.
After the firmware update is complete, please turn off the power manually and restart the printer.